Glass bottle manufacturers teach you to inspect glass wine bottles.

A glass wine bottle is a type of glass bottle. From the perspective of teaching you how to accept the goods when they are delivered?

(1) Observe whether the glass wine bottle is smooth and whether there are bubbles, impurities, cracks and stains.

(2) Observe whether the mouth of the bottle is protruding, sinking, whether the bottle body is deformed or the bottom is protruding; place the glass wine bottle upside down on a flat plate, take a uniform three points, and measure the difference between the bottle mouth and the bottle with a feeler gauge. The maximum value of the gap of the glass is the flatness of the mouth plane. The flatness of the bottle mouth is less than or equal to 0.3mm.3mm; the unevenness of the bottle mouth of 720ml is less than or equal to 0.4mm;

(3) Observe whether the bottle seams are in good condition, whether there are wrong seams, irregular seams and rough seams.

(4) Measure the outer diameter of the bottle mouth, measure the sealing ring of the bottle mouth with a vernier caliper (should deviate from the seam line), rotate 180 degrees to measure the size value, the average value is within the range specified by the outer diameter and size value of the bottle mouth, otherwise it is a flat mouth. The outer diameter of the bottle mouth is 58.9±0.45mm, and the outer diameter of the bottle mouth is 72.5±0.45mm.

(5) Check whether the thread of the glass wine bottle is uniform, and whether the thread is broken, missing or deformed.

The above is the inspection process of Yuncheng glass bottles, customized glass bottles, customized wine bottles, glass wine bottles and other wine bottles by glass wine bottle manufacturers.